Homemade Night Vision Scope [Selbstgebautes Nachtsichtgerät]
August 30, 2009 - 7:00 pm
Homemade night vision scope made from camcorder viewfinder a CMOS camera module and a couple of IR-LEDs. For more details check the link below.
***** ENGLISH *****:
http://www.endorphino.de/projects/electronics/borgadapter2/index_english.html
—————————-
Selbstgebautes Nachtsichtgerät aus einem alten Sucher eines Camcorders eines CMOS Videokameramoduls und einigen IR-LEDs. Für weitere Information bitte Link zur Website benutzen.
***** DEUTSCHE BESCHREIBUNG *****
http://www.endorphino.de/projects/electronics/borgadapter2/index.html
—————————-
a www.endorphino.de project
Duration : 0:1:14
August 30th, 2009 at 7:00 pm
Danke
Danke
August 30th, 2009 at 7:00 pm
Thanks – the LEDs …
Thanks – the LEDs have 850nm (SFH4550)
August 30th, 2009 at 7:00 pm
How many nm did the …
How many nm did the IR led have? great vidd Btw
August 30th, 2009 at 7:00 pm
y dont u just use a …
y dont u just use a flashlight?
August 30th, 2009 at 7:00 pm
learn english ^^
…
learn english ^^
man hört sogar dass du viel älter bist als ich zb
August 30th, 2009 at 7:00 pm
nice well done
nice well done
August 30th, 2009 at 7:00 pm
r u arnold …
r u arnold shwartniger
August 30th, 2009 at 7:00 pm
Hallo,
Das zweite …
Hallo,
Das zweite Kabel ist üblicherweise der Minus Pol (Masse). Wenn du den Sucher und die Kamera an der gleichen Batterie als Spannungsquelle betreibst, dann hast du die beiden Minus Pole ja bereits miteinander verbunden. In diesem Fall reicht ein Kabel (das richtige natuerlich!) um das Videosignal zu übertragen.
Auch bei zwei verschiedene Batterien, sollte der Minus Pol beider Einheiten miteinander verbunden sein (ansonsten stimmt das Massepotential nicht richtig).
August 30th, 2009 at 7:00 pm
hallo, ich hätte …
hallo, ich hätte eine Frage zu deinem Nachtsichtgerät, da ich gerade selber eines baue:Der Videoausgang der CMOS Kamera besteht ja aus 2 Drähten- ist zum Übertragen des Signals trotzdem nur ein Draht notwendig?
August 30th, 2009 at 7:00 pm
IR LED = “SFH4550″ …
IR LED = “SFH4550″ by OSRAM (opto semiconductor).
Applications = IR illumination, 100mA (I used 50mA), 850 nm, ± 3 deg., typ. 700 mW/sr, 5mm type
(bought via “Reichelt(dot)de”)
IR LED of another type might work as well. Just try some for IR illumination and not just the ones used for a TV remote control.
***
The invisible IR beam can irreversible harm your eys !
***
August 30th, 2009 at 7:00 pm
What LEDs did you …
What LEDs did you use and where did you find them. What were the LED specs? 850nm 10mm 200mW…
August 30th, 2009 at 7:00 pm
sorry is ja ne …
sorry is ja ne adresse dabei hat sich alles geklärt danke
August 30th, 2009 at 7:00 pm
nicht schlecht …
nicht schlecht taktisch ungünstig wegen dem licht aber für normalen gebrauch perfekt ^^
was ich nicht verstanden hab wie leuft das mit der stromversorgung für die leds? und welche hast du benutzt von der fehrnbedinung wohlkaum oda?